16 Sep A Guide to Multi-Camera Event Streaming in Ireland
Key Takeaways
Multi-camera livestreaming uses two or more cameras cut live by a vision mixer, rather than one static webcam feed.
It’s the standard setup for conferences, AGMs, town halls, and product launches with a stage and a screen.
Streams can be delivered to Zoom, Teams, Google Meet, Webex, or a public platform like YouTube, often simultaneously.
SMPTE ST 2110 and Dante/AoIP are the technical standards behind broadcast-grade IP video and audio over a network, used on higher-end multi-camera setups.
A single laptop webcam pointed at a stage is not the same thing as a livestream. Multi-camera livestreaming — two or more cameras cut live by an operator using a vision mixer — is what makes a stream watchable for more than a few minutes, and it’s become the baseline expectation for corporate conferences, AGMs, and hybrid events in Ireland.
What actually happens during a multi-camera stream
A typical setup includes a wide shot covering the stage, a tight shot on the speaker, and a dedicated feed from the presentation slides or screen content. A vision mixer — commonly a Blackmagic ATEM system — cuts live between these sources in real time, the same way a television broadcast does. Lower thirds (name and title captions), branded graphics, and slide-and-camera switching are layered in as the event happens, not added afterwards.
Where it gets used
Conferences and summits, AGMs and investor days, product launches, panel discussions, town halls and all-hands meetings, awards ceremonies, and hybrid events with both an in-room and remote audience are the most common use cases. Anything with a stage, a speaker, and an audience that isn’t entirely in the room benefits from multi-camera coverage rather than a single fixed angle.
Delivery platforms
Streams are typically delivered to whatever platform your audience already uses — Zoom, Microsoft Teams, Google Meet, or Cisco Webex for internal and corporate audiences, or a public platform for open events. It’s common to deliver to more than one platform simultaneously, so a company town hall might stream to Teams for staff while also being recorded for later upload to an intranet.
The technical layer: why AoIP and SMPTE 2110 matter
For larger or more technically demanding events, audio and video increasingly move over standard IP networks rather than dedicated broadcast cabling. Dante and AoIP (Audio over IP) route microphone and sound feeds across a network; SMPTE ST 2110 does the same for video. This matters practically because it means a livestream setup can scale to more cameras and mix locations without the cabling constraints of older broadcast systems — useful for large venues or split-site hybrid events.
Frequently Asked Questions
How many cameras do I actually need?
Two cameras (a wide and a close-up) cover most single-speaker events adequately. Panel discussions, larger stages, or events with audience Q&A typically benefit from three or more, so the operator has a shot ready for whoever is speaking.
Can a livestream also be recorded for later use?
Yes — most multi-camera setups record the full mixed output live, so you have a finished, edit-ready recording the moment the event ends, without needing a separate post-production edit for a basic version.
What internet connection does a venue need for livestreaming?
A stable upload speed of at least 10–20 Mbps dedicated to the stream is a reasonable baseline for a single HD stream, with more required for multiple simultaneous platform deliveries. It’s worth confirming venue Wi-Fi and wired options in advance rather than assuming general guest Wi-Fi will hold up.
Get In Touch
Idiosync Films delivers multi-camera livestreaming for conferences, AGMs, and hybrid events across Dublin and Ireland, using Blackmagic ATEM vision mixing, Dante-certified audio, and SMPTE ST 2110 workflows where the event calls for it. Get in touch at hi@idiosyncfilms.com to talk through your event.